DIY Next Generation: Custom 3D-printed 49 mm Lytro Filter Adapter

We’ve seen quite a few filter adapters for the Lytro LightField Camera before, but Perry’s solution takes the “Do it Yourself” spirit one step further:
Perry used a high resolution 3D printer (Objet24, 28 µm layer thickness) to print a custom filter holder for his Lytro camera:

My goal here is to create a filter holder for my 49mm filters. After printing today and testing, it holds my +2 and +4 close-up filters very well. No slippage, no hint that anything would fall off. (The macro filters provide little benefit except being able to close focus and the Lytro’s longest focal length, down to 5 1/2″ at 51.4mm.)

More pictures after the break:

via